ShanXi_SmartControl/IntelligentControlForsx/conf

所需驱动：
1.mysql-connector-net-6.9.8.msi
2.ZKFinger SDK 5.0.0.27(新指纹仪)

所需数据库：
1.mysql
2.数据适配器data-adapter


系统配置：
统一编码：conf/UniformCode.xml，主要配置风机参数等相关组态监控点
数据连接：GdxnyWindTurbineContorls.exe.config，需配置mysql数据库连接字符串，及其数据适配器restful接口地址

系统运行所需依赖dll:
1.uv.dll
2.gynet.dll
3.gymisc.dll
4.gycp.dll
将以上4个文件放在应用的根目录下
以上dll是系统创建风机控制句柄所需调用的的C++库


控制服务：
所需配置环境变量
C:\Program Files (x86)\GYEE\gybase\bin
C:\Program Files (x86)\GYEE\gybase\protocol
C:\Program Files (x86)\GYEE\wormhole\addin
C:\Program Files (x86)\GYEE\wormhole\bin
C:\Program Files (x86)\GYEE\wormhole\plugin
所需安装：
gybase-1.1.3-3.x86.msi
wormhole-5.2.0-5.x86.msi
vcredist_2010_x86.exe

服务搭建：
bridge_service:
1.创建服务所在文件夹
2.创建文件夹config,log
3.config文件夹中创建文件bridge.json
4.log文件夹中创建文件log.log

创建服务命令：
sc create GYEE_SBQ_CTRL_BRIDGED_5 binPath= "C:\Program Files (x86)\GYEE\wormhole\bin\bridged.exe -d \"GYEE_SBQ_CTRL_BRIDGED_5\" -c D:\Gyee_project\ControlService\SBQ_Control_5\config\bridged.json" start= auto

modbus_service:
1.创建服务所在文件夹
2.创建文件夹addin,config,keytable,log
3.addin中创建libaddinmodbus.json
4.config中创建blackholed.json
5.keytable中创建keytable.sqlite3,该表为modbus地址映射表
6.log文件夹中创建log.log
创建服务命令：
sc create GYEE_SBQ_CTRL_1 binPath= "C:\Program Files (x86)\GYEE\wormhole\bin\blackholed.exe -d \"GYEE_SBQ_CTRL_1\" -c D:\Gyee_project\ControlService\SBQ_COntrol_Service_1\config\blackholed.json" start= auto
创建sqlite3映射表命令：
"C:\Program Files (x86)\GYEE\wormhole\tool\SQLite3\sqlite3.exe" D:\Gyee_project\ControlService\SBQ_COntrol_Service_1\keytable\keytable3.sqlite3 "drop table key_table;"
"C:\Program Files (x86)\GYEE\wormhole\tool\SQLite3\sqlite3.exe" D:\Gyee_project\ControlService\SBQ_COntrol_Service_1\keytable\keytable3.sqlite3 "create table key_table(gycp_addr integer, modbus_uid integer, modbus_addr integer, modbus_fun integer, modbus_type integer, modbus_swap integer, switch_valid integer, switch_addr integer, switch_fun integer, switch_type integer, switch_swap integer, switch_value real);"
"C:\Program Files (x86)\GYEE\wormhole\tool\SQLite3\sqlite3.exe" --csv D:\Gyee_project\ControlService\SBQ_COntrol_Service_1\keytable\keytable3.sqlite3 ".import D:\\Gyee_project\\ControlService\\SBQ_COntrol_Service_1\\keytable\\gyee_sbq_ctrl_3.csv key_table"

------------------------------配置文件示例-------------------------------
bridge_service:
---bridged.json:
{
"engine": {
"pwd": "D:\\Gyee_project\\ControlService\\SBQ_Control_1",//服务所在路径
"stop_check": 100
},
"log": {
"dir": "log",
"file": "log.log",
"level": 1
},
"mode": {
"protocol": "tcp",
"type": "loadbalancer"
},
"ci": {
"t0": 30,
"is_server": 1,
"ip": "0.0.0.0",//本机ip
"port": 9901,//服务端口
"local_ip": "0.0.0.0",
"local_port": 0
},
"fi": [
{
"t0": 30,
"is_server": 0,
"ip": "127.0.0.1",//modbus服务ip
"port": 9911,//modbus服务端口
"local_ip": "0.0.0.0",
"local_port": 0
}

]
}


modbus_service:
---libaddinmodbus.json:

{
"ip": "10.1.50.250",//modbus地址
"port": 502,//modbus端口
"is_server": 0,
"local_ip": "10.1.50.222",//本机服务ip modbus地址和本机地址在同一网段
"local_port": 0,
"hton_register": 1,
"hton_total": 0,
"t0": 30,
"t1": 30,
"retries": 10,
"hash_count": 256,
"coils_quantity_max": 2000,
"registers_quantity_max": 125,
"timer_send": 1,
"repeat": 1
}
若服务器有多个同一网段不同ip时，需要配置 localIp

---blackholed.json:

{
"engine": {
"pwd": "D:\\Gyee_project\\ControlService\\SBQ_Control_Service_1",
"stop_check": 100
},
"log": {
"dir": "log",
"file": "log.log",
"level": 0
},
"keytable": {
"dir": "keytable",
"file": "keytable.sqlite3"
},
"gycp": {
"ip": "0.0.0.0", //本机ip
"port": 9911, //对外提供服务端口
"is_server": 1,
"t0": 30,
"t1": 20,
"t2": 10
},
"addin": {
"dir": "addin",
"addin": "addinmodbus.dll",
"config": "libaddinmodbus.json"
}
}




-------------------------------------------------------------------------