/**
 * Cesium - https://github.com/CesiumGS/cesium
 *
 * Copyright 2011-2020 Cesium Contributors
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *
 * Columbus View (Pat. Pend.)
 *
 * Portions licensed separately.
 * See https://github.com/CesiumGS/cesium/blob/master/LICENSE.md for full licensing details.
 */

define(['exports', './when-54c2dc71', './Check-6c0211bc', './Math-1124a290', './Cartesian2-33d2657c', './Transforms-8be64844', './Plane-fa30fc46', './EllipsoidTangentPlane-ce6e380f'], function (exports, when, Check, _Math, Cartesian2, Transforms, Plane, EllipsoidTangentPlane) { 'use strict';

  /**
   * Creates an instance of an OrientedBoundingBox.
   * An OrientedBoundingBox of some object is a closed and convex cuboid. It can provide a tighter bounding volume than {@link BoundingSphere} or {@link AxisAlignedBoundingBox} in many cases.
   * @alias OrientedBoundingBox
   * @constructor
   *
   * @param {Cartesian3} [center=Cartesian3.ZERO] The center of the box.
   * @param {Matrix3} [halfAxes=Matrix3.ZERO] The three orthogonal half-axes of the bounding box.
   *                                          Equivalently, the transformation matrix, to rotate and scale a 0x0x0
   *                                          cube centered at the origin.
   *
   *
   * @example
   * // Create an OrientedBoundingBox using a transformation matrix, a position where the box will be translated, and a scale.
   * var center = new Cesium.Cartesian3(1.0, 0.0, 0.0);
   * var halfAxes = Cesium.Matrix3.fromScale(new Cesium.Cartesian3(1.0, 3.0, 2.0), new Cesium.Matrix3());
   *
   * var obb = new Cesium.OrientedBoundingBox(center, halfAxes);
   *
   * @see BoundingSphere
   * @see BoundingRectangle
   */
  function OrientedBoundingBox(center, halfAxes) {
    /**
     * The center of the box.
     * @type {Cartesian3}
     * @default {@link Cartesian3.ZERO}
     */
    this.center = Cartesian2.Cartesian3.clone(when.defaultValue(center, Cartesian2.Cartesian3.ZERO));
    /**
     * The transformation matrix, to rotate the box to the right position.
     * @type {Matrix3}
     * @default {@link Matrix3.ZERO}
     */
    this.halfAxes = Transforms.Matrix3.clone(when.defaultValue(halfAxes, Transforms.Matrix3.ZERO));
  }

  /**
   * The number of elements used to pack the object into an array.
   * @type {Number}
   */
  OrientedBoundingBox.packedLength =
    Cartesian2.Cartesian3.packedLength + Transforms.Matrix3.packedLength;

  /**
   * Stores the provided instance into the provided array.
   *
   * @param {OrientedBoundingBox} value The value to pack.
   * @param {Number[]} array The array to pack into.
   * @param {Number} [startingIndex=0] The index into the array at which to start packing the elements.
   *
   * @returns {Number[]} The array that was packed into
   */
  OrientedBoundingBox.pack = function (value, array, startingIndex) {
    //>>includeStart('debug', pragmas.debug);
    Check.Check.typeOf.object("value", value);
    Check.Check.defined("array", array);
    //>>includeEnd('debug');

    startingIndex = when.defaultValue(startingIndex, 0);

    Cartesian2.Cartesian3.pack(value.center, array, startingIndex);
    Transforms.Matrix3.pack(value.halfAxes, array, startingIndex + Cartesian2.Cartesian3.packedLength);

    return array;
  };

  /**
   * Retrieves an instance from a packed array.
   *
   * @param {Number[]} array The packed array.
   * @param {Number} [startingIndex=0] The starting index of the element to be unpacked.
   * @param {OrientedBoundingBox} [result] The object into which to store the result.
   * @returns {OrientedBoundingBox} The modified result parameter or a new OrientedBoundingBox instance if one was not provided.
   */
  OrientedBoundingBox.unpack = function (array, startingIndex, result) {
    //>>includeStart('debug', pragmas.debug);
    Check.Check.defined("array", array);
    //>>includeEnd('debug');

    startingIndex = when.defaultValue(startingIndex, 0);

    if (!when.defined(result)) {
      result = new OrientedBoundingBox();
    }

    Cartesian2.Cartesian3.unpack(array, startingIndex, result.center);
    Transforms.Matrix3.unpack(
      array,
      startingIndex + Cartesian2.Cartesian3.packedLength,
      result.halfAxes
    );
    return result;
  };

  var scratchCartesian1 = new Cartesian2.Cartesian3();
  var scratchCartesian2 = new Cartesian2.Cartesian3();
  var scratchCartesian3 = new Cartesian2.Cartesian3();
  var scratchCartesian4 = new Cartesian2.Cartesian3();
  var scratchCartesian5 = new Cartesian2.Cartesian3();
  var scratchCartesian6 = new Cartesian2.Cartesian3();
  var scratchCovarianceResult = new Transforms.Matrix3();
  var scratchEigenResult = {
    unitary: new Transforms.Matrix3(),
    diagonal: new Transforms.Matrix3(),
  };

  /**
   * Computes an instance of an OrientedBoundingBox of the given positions.
   * This is an implementation of Stefan Gottschalk's Collision Queries using Oriented Bounding Boxes solution (PHD thesis).
   * Reference: http://gamma.cs.unc.edu/users/gottschalk/main.pdf
   *
   * @param {Cartesian3[]} [positions] List of {@link Cartesian3} points that the bounding box will enclose.
   * @param {OrientedBoundingBox} [result] The object onto which to store the result.
   * @returns {OrientedBoundingBox} The modified result parameter or a new OrientedBoundingBox instance if one was not provided.
   *
   * @example
   * // Compute an object oriented bounding box enclosing two points.
   * var box = Cesium.OrientedBoundingBox.fromPoints([new Cesium.Cartesian3(2, 0, 0), new Cesium.Cartesian3(-2, 0, 0)]);
   */
  OrientedBoundingBox.fromPoints = function (positions, result) {
    if (!when.defined(result)) {
      result = new OrientedBoundingBox();
    }

    if (!when.defined(positions) || positions.length === 0) {
      result.halfAxes = Transforms.Matrix3.ZERO;
      result.center = Cartesian2.Cartesian3.ZERO;
      return result;
    }

    var i;
    var length = positions.length;

    var meanPoint = Cartesian2.Cartesian3.clone(positions[0], scratchCartesian1);
    for (i = 1; i < length; i++) {
      Cartesian2.Cartesian3.add(meanPoint, positions[i], meanPoint);
    }
    var invLength = 1.0 / length;
    Cartesian2.Cartesian3.multiplyByScalar(meanPoint, invLength, meanPoint);

    var exx = 0.0;
    var exy = 0.0;
    var exz = 0.0;
    var eyy = 0.0;
    var eyz = 0.0;
    var ezz = 0.0;
    var p;

    for (i = 0; i < length; i++) {
      p = Cartesian2.Cartesian3.subtract(positions[i], meanPoint, scratchCartesian2);
      exx += p.x * p.x;
      exy += p.x * p.y;
      exz += p.x * p.z;
      eyy += p.y * p.y;
      eyz += p.y * p.z;
      ezz += p.z * p.z;
    }

    exx *= invLength;
    exy *= invLength;
    exz *= invLength;
    eyy *= invLength;
    eyz *= invLength;
    ezz *= invLength;

    var covarianceMatrix = scratchCovarianceResult;
    covarianceMatrix[0] = exx;
    covarianceMatrix[1] = exy;
    covarianceMatrix[2] = exz;
    covarianceMatrix[3] = exy;
    covarianceMatrix[4] = eyy;
    covarianceMatrix[5] = eyz;
    covarianceMatrix[6] = exz;
    covarianceMatrix[7] = eyz;
    covarianceMatrix[8] = ezz;

    var eigenDecomposition = Transforms.Matrix3.computeEigenDecomposition(
      covarianceMatrix,
      scratchEigenResult
    );
    var rotation = Transforms.Matrix3.clone(eigenDecomposition.unitary, result.halfAxes);

    var v1 = Transforms.Matrix3.getColumn(rotation, 0, scratchCartesian4);
    var v2 = Transforms.Matrix3.getColumn(rotation, 1, scratchCartesian5);
    var v3 = Transforms.Matrix3.getColumn(rotation, 2, scratchCartesian6);

    var u1 = -Number.MAX_VALUE;
    var u2 = -Number.MAX_VALUE;
    var u3 = -Number.MAX_VALUE;
    var l1 = Number.MAX_VALUE;
    var l2 = Number.MAX_VALUE;
    var l3 = Number.MAX_VALUE;

    for (i = 0; i < length; i++) {
      p = positions[i];
      u1 = Math.max(Cartesian2.Cartesian3.dot(v1, p), u1);
      u2 = Math.max(Cartesian2.Cartesian3.dot(v2, p), u2);
      u3 = Math.max(Cartesian2.Cartesian3.dot(v3, p), u3);

      l1 = Math.min(Cartesian2.Cartesian3.dot(v1, p), l1);
      l2 = Math.min(Cartesian2.Cartesian3.dot(v2, p), l2);
      l3 = Math.min(Cartesian2.Cartesian3.dot(v3, p), l3);
    }

    v1 = Cartesian2.Cartesian3.multiplyByScalar(v1, 0.5 * (l1 + u1), v1);
    v2 = Cartesian2.Cartesian3.multiplyByScalar(v2, 0.5 * (l2 + u2), v2);
    v3 = Cartesian2.Cartesian3.multiplyByScalar(v3, 0.5 * (l3 + u3), v3);

    var center = Cartesian2.Cartesian3.add(v1, v2, result.center);
    Cartesian2.Cartesian3.add(center, v3, center);

    var scale = scratchCartesian3;
    scale.x = u1 - l1;
    scale.y = u2 - l2;
    scale.z = u3 - l3;
    Cartesian2.Cartesian3.multiplyByScalar(scale, 0.5, scale);
    Transforms.Matrix3.multiplyByScale(result.halfAxes, scale, result.halfAxes);

    return result;
  };

  var scratchOffset = new Cartesian2.Cartesian3();
  var scratchScale = new Cartesian2.Cartesian3();
  function fromPlaneExtents(
    planeOrigin,
    planeXAxis,
    planeYAxis,
    planeZAxis,
    minimumX,
    maximumX,
    minimumY,
    maximumY,
    minimumZ,
    maximumZ,
    result
  ) {
    //>>includeStart('debug', pragmas.debug);
    if (
      !when.defined(minimumX) ||
      !when.defined(maximumX) ||
      !when.defined(minimumY) ||
      !when.defined(maximumY) ||
      !when.defined(minimumZ) ||
      !when.defined(maximumZ)
    ) {
      throw new Check.DeveloperError(
        "all extents (minimum/maximum X/Y/Z) are required."
      );
    }
    //>>includeEnd('debug');

    if (!when.defined(result)) {
      result = new OrientedBoundingBox();
    }

    var halfAxes = result.halfAxes;
    Transforms.Matrix3.setColumn(halfAxes, 0, planeXAxis, halfAxes);
    Transforms.Matrix3.setColumn(halfAxes, 1, planeYAxis, halfAxes);
    Transforms.Matrix3.setColumn(halfAxes, 2, planeZAxis, halfAxes);

    var centerOffset = scratchOffset;
    centerOffset.x = (minimumX + maximumX) / 2.0;
    centerOffset.y = (minimumY + maximumY) / 2.0;
    centerOffset.z = (minimumZ + maximumZ) / 2.0;

    var scale = scratchScale;
    scale.x = (maximumX - minimumX) / 2.0;
    scale.y = (maximumY - minimumY) / 2.0;
    scale.z = (maximumZ - minimumZ) / 2.0;

    var center = result.center;
    centerOffset = Transforms.Matrix3.multiplyByVector(halfAxes, centerOffset, centerOffset);
    Cartesian2.Cartesian3.add(planeOrigin, centerOffset, center);
    Transforms.Matrix3.multiplyByScale(halfAxes, scale, halfAxes);

    return result;
  }

  var scratchRectangleCenterCartographic = new Cartesian2.Cartographic();
  var scratchRectangleCenter = new Cartesian2.Cartesian3();
  var scratchPerimeterCartographicNC = new Cartesian2.Cartographic();
  var scratchPerimeterCartographicNW = new Cartesian2.Cartographic();
  var scratchPerimeterCartographicCW = new Cartesian2.Cartographic();
  var scratchPerimeterCartographicSW = new Cartesian2.Cartographic();
  var scratchPerimeterCartographicSC = new Cartesian2.Cartographic();
  var scratchPerimeterCartesianNC = new Cartesian2.Cartesian3();
  var scratchPerimeterCartesianNW = new Cartesian2.Cartesian3();
  var scratchPerimeterCartesianCW = new Cartesian2.Cartesian3();
  var scratchPerimeterCartesianSW = new Cartesian2.Cartesian3();
  var scratchPerimeterCartesianSC = new Cartesian2.Cartesian3();
  var scratchPerimeterProjectedNC = new Cartesian2.Cartesian2();
  var scratchPerimeterProjectedNW = new Cartesian2.Cartesian2();
  var scratchPerimeterProjectedCW = new Cartesian2.Cartesian2();
  var scratchPerimeterProjectedSW = new Cartesian2.Cartesian2();
  var scratchPerimeterProjectedSC = new Cartesian2.Cartesian2();

  var scratchPlaneOrigin = new Cartesian2.Cartesian3();
  var scratchPlaneNormal = new Cartesian2.Cartesian3();
  var scratchPlaneXAxis = new Cartesian2.Cartesian3();
  var scratchHorizonCartesian = new Cartesian2.Cartesian3();
  var scratchHorizonProjected = new Cartesian2.Cartesian2();
  var scratchMaxY = new Cartesian2.Cartesian3();
  var scratchMinY = new Cartesian2.Cartesian3();
  var scratchZ = new Cartesian2.Cartesian3();
  var scratchPlane = new Plane.Plane(Cartesian2.Cartesian3.UNIT_X, 0.0);

  /**
   * Computes an OrientedBoundingBox that bounds a {@link Rectangle} on the surface of an {@link Ellipsoid}.
   * There are no guarantees about the orientation of the bounding box.
   *
   * @param {Rectangle} rectangle The cartographic rectangle on the surface of the ellipsoid.
   * @param {Number} [minimumHeight=0.0] The minimum height (elevation) within the tile.
   * @param {Number} [maximumHeight=0.0] The maximum height (elevation) within the tile.
   * @param {Ellipsoid} [ellipsoid=Ellipsoid.WGS84] The ellipsoid on which the rectangle is defined.
   * @param {OrientedBoundingBox} [result] The object onto which to store the result.
   * @returns {OrientedBoundingBox} The modified result parameter or a new OrientedBoundingBox instance if none was provided.
   *
   * @exception {DeveloperError} rectangle.width must be between 0 and pi.
   * @exception {DeveloperError} rectangle.height must be between 0 and pi.
   * @exception {DeveloperError} ellipsoid must be an ellipsoid of revolution (<code>radii.x == radii.y</code>)
   */
  OrientedBoundingBox.fromRectangle = function (
    rectangle,
    minimumHeight,
    maximumHeight,
    ellipsoid,
    result
  ) {
    //>>includeStart('debug', pragmas.debug);
    if (!when.defined(rectangle)) {
      throw new Check.DeveloperError("rectangle is required");
    }
    if (rectangle.width < 0.0 || rectangle.width > _Math.CesiumMath.TWO_PI) {
      throw new Check.DeveloperError("Rectangle width must be between 0 and 2*pi");
    }
    if (rectangle.height < 0.0 || rectangle.height > _Math.CesiumMath.PI) {
      throw new Check.DeveloperError("Rectangle height must be between 0 and pi");
    }
    if (
      when.defined(ellipsoid) &&
      !_Math.CesiumMath.equalsEpsilon(
        ellipsoid.radii.x,
        ellipsoid.radii.y,
        _Math.CesiumMath.EPSILON15
      )
    ) {
      throw new Check.DeveloperError(
        "Ellipsoid must be an ellipsoid of revolution (radii.x == radii.y)"
      );
    }
    //>>includeEnd('debug');

    minimumHeight = when.defaultValue(minimumHeight, 0.0);
    maximumHeight = when.defaultValue(maximumHeight, 0.0);
    ellipsoid = when.defaultValue(ellipsoid, Cartesian2.Ellipsoid.WGS84);

    var minX, maxX, minY, maxY, minZ, maxZ, plane;

    if (rectangle.width <= _Math.CesiumMath.PI) {
      // The bounding box will be aligned with the tangent plane at the center of the rectangle.
      var tangentPointCartographic = Cartesian2.Rectangle.center(
        rectangle,
        scratchRectangleCenterCartographic
      );
      var tangentPoint = ellipsoid.cartographicToCartesian(
        tangentPointCartographic,
        scratchRectangleCenter
      );
      var tangentPlane = new EllipsoidTangentPlane.EllipsoidTangentPlane(tangentPoint, ellipsoid);
      plane = tangentPlane.plane;

      // If the rectangle spans the equator, CW is instead aligned with the equator (because it sticks out the farthest at the equator).
      var lonCenter = tangentPointCartographic.longitude;
      var latCenter =
        rectangle.south < 0.0 && rectangle.north > 0.0
          ? 0.0
          : tangentPointCartographic.latitude;

      // Compute XY extents using the rectangle at maximum height
      var perimeterCartographicNC = Cartesian2.Cartographic.fromRadians(
        lonCenter,
        rectangle.north,
        maximumHeight,
        scratchPerimeterCartographicNC
      );
      var perimeterCartographicNW = Cartesian2.Cartographic.fromRadians(
        rectangle.west,
        rectangle.north,
        maximumHeight,
        scratchPerimeterCartographicNW
      );
      var perimeterCartographicCW = Cartesian2.Cartographic.fromRadians(
        rectangle.west,
        latCenter,
        maximumHeight,
        scratchPerimeterCartographicCW
      );
      var perimeterCartographicSW = Cartesian2.Cartographic.fromRadians(
        rectangle.west,
        rectangle.south,
        maximumHeight,
        scratchPerimeterCartographicSW
      );
      var perimeterCartographicSC = Cartesian2.Cartographic.fromRadians(
        lonCenter,
        rectangle.south,
        maximumHeight,
        scratchPerimeterCartographicSC
      );

      var perimeterCartesianNC = ellipsoid.cartographicToCartesian(
        perimeterCartographicNC,
        scratchPerimeterCartesianNC
      );
      var perimeterCartesianNW = ellipsoid.cartographicToCartesian(
        perimeterCartographicNW,
        scratchPerimeterCartesianNW
      );
      var perimeterCartesianCW = ellipsoid.cartographicToCartesian(
        perimeterCartographicCW,
        scratchPerimeterCartesianCW
      );
      var perimeterCartesianSW = ellipsoid.cartographicToCartesian(
        perimeterCartographicSW,
        scratchPerimeterCartesianSW
      );
      var perimeterCartesianSC = ellipsoid.cartographicToCartesian(
        perimeterCartographicSC,
        scratchPerimeterCartesianSC
      );

      var perimeterProjectedNC = tangentPlane.projectPointToNearestOnPlane(
        perimeterCartesianNC,
        scratchPerimeterProjectedNC
      );
      var perimeterProjectedNW = tangentPlane.projectPointToNearestOnPlane(
        perimeterCartesianNW,
        scratchPerimeterProjectedNW
      );
      var perimeterProjectedCW = tangentPlane.projectPointToNearestOnPlane(
        perimeterCartesianCW,
        scratchPerimeterProjectedCW
      );
      var perimeterProjectedSW = tangentPlane.projectPointToNearestOnPlane(
        perimeterCartesianSW,
        scratchPerimeterProjectedSW
      );
      var perimeterProjectedSC = tangentPlane.projectPointToNearestOnPlane(
        perimeterCartesianSC,
        scratchPerimeterProjectedSC
      );

      minX = Math.min(
        perimeterProjectedNW.x,
        perimeterProjectedCW.x,
        perimeterProjectedSW.x
      );
      maxX = -minX; // symmetrical

      maxY = Math.max(perimeterProjectedNW.y, perimeterProjectedNC.y);
      minY = Math.min(perimeterProjectedSW.y, perimeterProjectedSC.y);

      // Compute minimum Z using the rectangle at minimum height, since it will be deeper than the maximum height
      perimeterCartographicNW.height = perimeterCartographicSW.height = minimumHeight;
      perimeterCartesianNW = ellipsoid.cartographicToCartesian(
        perimeterCartographicNW,
        scratchPerimeterCartesianNW
      );
      perimeterCartesianSW = ellipsoid.cartographicToCartesian(
        perimeterCartographicSW,
        scratchPerimeterCartesianSW
      );

      minZ = Math.min(
        Plane.Plane.getPointDistance(plane, perimeterCartesianNW),
        Plane.Plane.getPointDistance(plane, perimeterCartesianSW)
      );
      maxZ = maximumHeight; // Since the tangent plane touches the surface at height = 0, this is okay

      return fromPlaneExtents(
        tangentPlane.origin,
        tangentPlane.xAxis,
        tangentPlane.yAxis,
        tangentPlane.zAxis,
        minX,
        maxX,
        minY,
        maxY,
        minZ,
        maxZ,
        result
      );
    }

    // Handle the case where rectangle width is greater than PI (wraps around more than half the ellipsoid).
    var fullyAboveEquator = rectangle.south > 0.0;
    var fullyBelowEquator = rectangle.north < 0.0;
    var latitudeNearestToEquator = fullyAboveEquator
      ? rectangle.south
      : fullyBelowEquator
      ? rectangle.north
      : 0.0;
    var centerLongitude = Cartesian2.Rectangle.center(
      rectangle,
      scratchRectangleCenterCartographic
    ).longitude;

    // Plane is located at the rectangle's center longitude and the rectangle's latitude that is closest to the equator. It rotates around the Z axis.
    // This results in a better fit than the obb approach for smaller rectangles, which orients with the rectangle's center normal.
    var planeOrigin = Cartesian2.Cartesian3.fromRadians(
      centerLongitude,
      latitudeNearestToEquator,
      maximumHeight,
      ellipsoid,
      scratchPlaneOrigin
    );
    planeOrigin.z = 0.0; // center the plane on the equator to simpify plane normal calculation
    var isPole =
      Math.abs(planeOrigin.x) < _Math.CesiumMath.EPSILON10 &&
      Math.abs(planeOrigin.y) < _Math.CesiumMath.EPSILON10;
    var planeNormal = !isPole
      ? Cartesian2.Cartesian3.normalize(planeOrigin, scratchPlaneNormal)
      : Cartesian2.Cartesian3.UNIT_X;
    var planeYAxis = Cartesian2.Cartesian3.UNIT_Z;
    var planeXAxis = Cartesian2.Cartesian3.cross(planeNormal, planeYAxis, scratchPlaneXAxis);
    plane = Plane.Plane.fromPointNormal(planeOrigin, planeNormal, scratchPlane);

    // Get the horizon point relative to the center. This will be the farthest extent in the plane's X dimension.
    var horizonCartesian = Cartesian2.Cartesian3.fromRadians(
      centerLongitude + _Math.CesiumMath.PI_OVER_TWO,
      latitudeNearestToEquator,
      maximumHeight,
      ellipsoid,
      scratchHorizonCartesian
    );
    maxX = Cartesian2.Cartesian3.dot(
      Plane.Plane.projectPointOntoPlane(
        plane,
        horizonCartesian,
        scratchHorizonProjected
      ),
      planeXAxis
    );
    minX = -maxX; // symmetrical

    // Get the min and max Y, using the height that will give the largest extent
    maxY = Cartesian2.Cartesian3.fromRadians(
      0.0,
      rectangle.north,
      fullyBelowEquator ? minimumHeight : maximumHeight,
      ellipsoid,
      scratchMaxY
    ).z;
    minY = Cartesian2.Cartesian3.fromRadians(
      0.0,
      rectangle.south,
      fullyAboveEquator ? minimumHeight : maximumHeight,
      ellipsoid,
      scratchMinY
    ).z;

    var farZ = Cartesian2.Cartesian3.fromRadians(
      rectangle.east,
      latitudeNearestToEquator,
      maximumHeight,
      ellipsoid,
      scratchZ
    );
    minZ = Plane.Plane.getPointDistance(plane, farZ);
    maxZ = 0.0; // plane origin starts at maxZ already

    // min and max are local to the plane axes
    return fromPlaneExtents(
      planeOrigin,
      planeXAxis,
      planeYAxis,
      planeNormal,
      minX,
      maxX,
      minY,
      maxY,
      minZ,
      maxZ,
      result
    );
  };

  /**
   * Duplicates a OrientedBoundingBox instance.
   *
   * @param {OrientedBoundingBox} box The bounding box to duplicate.
   * @param {OrientedBoundingBox} [result] The object onto which to store the result.
   * @returns {OrientedBoundingBox} The modified result parameter or a new OrientedBoundingBox instance if none was provided. (Returns undefined if box is undefined)
   */
  OrientedBoundingBox.clone = function (box, result) {
    if (!when.defined(box)) {
      return undefined;
    }

    if (!when.defined(result)) {
      return new OrientedBoundingBox(box.center, box.halfAxes);
    }

    Cartesian2.Cartesian3.clone(box.center, result.center);
    Transforms.Matrix3.clone(box.halfAxes, result.halfAxes);

    return result;
  };

  /**
   * Determines which side of a plane the oriented bounding box is located.
   *
   * @param {OrientedBoundingBox} box The oriented bounding box to test.
   * @param {Plane} plane The plane to test against.
   * @returns {Intersect} {@link Intersect.INSIDE} if the entire box is on the side of the plane
   *                      the normal is pointing, {@link Intersect.OUTSIDE} if the entire box is
   *                      on the opposite side, and {@link Intersect.INTERSECTING} if the box
   *                      intersects the plane.
   */
  OrientedBoundingBox.intersectPlane = function (box, plane) {
    //>>includeStart('debug', pragmas.debug);
    if (!when.defined(box)) {
      throw new Check.DeveloperError("box is required.");
    }

    if (!when.defined(plane)) {
      throw new Check.DeveloperError("plane is required.");
    }
    //>>includeEnd('debug');

    var center = box.center;
    var normal = plane.normal;
    var halfAxes = box.halfAxes;
    var normalX = normal.x,
      normalY = normal.y,
      normalZ = normal.z;
    // plane is used as if it is its normal; the first three components are assumed to be normalized
    var radEffective =
      Math.abs(
        normalX * halfAxes[Transforms.Matrix3.COLUMN0ROW0] +
          normalY * halfAxes[Transforms.Matrix3.COLUMN0ROW1] +
          normalZ * halfAxes[Transforms.Matrix3.COLUMN0ROW2]
      ) +
      Math.abs(
        normalX * halfAxes[Transforms.Matrix3.COLUMN1ROW0] +
          normalY * halfAxes[Transforms.Matrix3.COLUMN1ROW1] +
          normalZ * halfAxes[Transforms.Matrix3.COLUMN1ROW2]
      ) +
      Math.abs(
        normalX * halfAxes[Transforms.Matrix3.COLUMN2ROW0] +
          normalY * halfAxes[Transforms.Matrix3.COLUMN2ROW1] +
          normalZ * halfAxes[Transforms.Matrix3.COLUMN2ROW2]
      );
    var distanceToPlane = Cartesian2.Cartesian3.dot(normal, center) + plane.distance;

    if (distanceToPlane <= -radEffective) {
      // The entire box is on the negative side of the plane normal
      return Transforms.Intersect.OUTSIDE;
    } else if (distanceToPlane >= radEffective) {
      // The entire box is on the positive side of the plane normal
      return Transforms.Intersect.INSIDE;
    }
    return Transforms.Intersect.INTERSECTING;
  };

  var scratchCartesianU = new Cartesian2.Cartesian3();
  var scratchCartesianV = new Cartesian2.Cartesian3();
  var scratchCartesianW = new Cartesian2.Cartesian3();
  var scratchPPrime = new Cartesian2.Cartesian3();

  /**
   * Computes the estimated distance squared from the closest point on a bounding box to a point.
   *
   * @param {OrientedBoundingBox} box The box.
   * @param {Cartesian3} cartesian The point
   * @returns {Number} The estimated distance squared from the bounding sphere to the point.
   *
   * @example
   * // Sort bounding boxes from back to front
   * boxes.sort(function(a, b) {
   *     return Cesium.OrientedBoundingBox.distanceSquaredTo(b, camera.positionWC) - Cesium.OrientedBoundingBox.distanceSquaredTo(a, camera.positionWC);
   * });
   */
  OrientedBoundingBox.distanceSquaredTo = function (box, cartesian) {
    // See Geometric Tools for Computer Graphics 10.4.2

    //>>includeStart('debug', pragmas.debug);
    if (!when.defined(box)) {
      throw new Check.DeveloperError("box is required.");
    }
    if (!when.defined(cartesian)) {
      throw new Check.DeveloperError("cartesian is required.");
    }
    //>>includeEnd('debug');

    var offset = Cartesian2.Cartesian3.subtract(cartesian, box.center, scratchOffset);

    var halfAxes = box.halfAxes;
    var u = Transforms.Matrix3.getColumn(halfAxes, 0, scratchCartesianU);
    var v = Transforms.Matrix3.getColumn(halfAxes, 1, scratchCartesianV);
    var w = Transforms.Matrix3.getColumn(halfAxes, 2, scratchCartesianW);

    var uHalf = Cartesian2.Cartesian3.magnitude(u);
    var vHalf = Cartesian2.Cartesian3.magnitude(v);
    var wHalf = Cartesian2.Cartesian3.magnitude(w);

    Cartesian2.Cartesian3.normalize(u, u);
    Cartesian2.Cartesian3.normalize(v, v);
    Cartesian2.Cartesian3.normalize(w, w);

    var pPrime = scratchPPrime;
    pPrime.x = Cartesian2.Cartesian3.dot(offset, u);
    pPrime.y = Cartesian2.Cartesian3.dot(offset, v);
    pPrime.z = Cartesian2.Cartesian3.dot(offset, w);

    var distanceSquared = 0.0;
    var d;

    if (pPrime.x < -uHalf) {
      d = pPrime.x + uHalf;
      distanceSquared += d * d;
    } else if (pPrime.x > uHalf) {
      d = pPrime.x - uHalf;
      distanceSquared += d * d;
    }

    if (pPrime.y < -vHalf) {
      d = pPrime.y + vHalf;
      distanceSquared += d * d;
    } else if (pPrime.y > vHalf) {
      d = pPrime.y - vHalf;
      distanceSquared += d * d;
    }

    if (pPrime.z < -wHalf) {
      d = pPrime.z + wHalf;
      distanceSquared += d * d;
    } else if (pPrime.z > wHalf) {
      d = pPrime.z - wHalf;
      distanceSquared += d * d;
    }

    return distanceSquared;
  };

  var scratchCorner = new Cartesian2.Cartesian3();
  var scratchToCenter = new Cartesian2.Cartesian3();

  /**
   * The distances calculated by the vector from the center of the bounding box to position projected onto direction.
   * <br>
   * If you imagine the infinite number of planes with normal direction, this computes the smallest distance to the
   * closest and farthest planes from position that intersect the bounding box.
   *
   * @param {OrientedBoundingBox} box The bounding box to calculate the distance to.
   * @param {Cartesian3} position The position to calculate the distance from.
   * @param {Cartesian3} direction The direction from position.
   * @param {Interval} [result] A Interval to store the nearest and farthest distances.
   * @returns {Interval} The nearest and farthest distances on the bounding box from position in direction.
   */
  OrientedBoundingBox.computePlaneDistances = function (
    box,
    position,
    direction,
    result
  ) {
    //>>includeStart('debug', pragmas.debug);
    if (!when.defined(box)) {
      throw new Check.DeveloperError("box is required.");
    }

    if (!when.defined(position)) {
      throw new Check.DeveloperError("position is required.");
    }

    if (!when.defined(direction)) {
      throw new Check.DeveloperError("direction is required.");
    }
    //>>includeEnd('debug');

    if (!when.defined(result)) {
      result = new Transforms.Interval();
    }

    var minDist = Number.POSITIVE_INFINITY;
    var maxDist = Number.NEGATIVE_INFINITY;

    var center = box.center;
    var halfAxes = box.halfAxes;

    var u = Transforms.Matrix3.getColumn(halfAxes, 0, scratchCartesianU);
    var v = Transforms.Matrix3.getColumn(halfAxes, 1, scratchCartesianV);
    var w = Transforms.Matrix3.getColumn(halfAxes, 2, scratchCartesianW);

    // project first corner
    var corner = Cartesian2.Cartesian3.add(u, v, scratchCorner);
    Cartesian2.Cartesian3.add(corner, w, corner);
    Cartesian2.Cartesian3.add(corner, center, corner);

    var toCenter = Cartesian2.Cartesian3.subtract(corner, position, scratchToCenter);
    var mag = Cartesian2.Cartesian3.dot(direction, toCenter);

    minDist = Math.min(mag, minDist);
    maxDist = Math.max(mag, maxDist);

    // project second corner
    Cartesian2.Cartesian3.add(center, u, corner);
    Cartesian2.Cartesian3.add(corner, v, corner);
    Cartesian2.Cartesian3.subtract(corner, w, corner);

    Cartesian2.Cartesian3.subtract(corner, position, toCenter);
    mag = Cartesian2.Cartesian3.dot(direction, toCenter);

    minDist = Math.min(mag, minDist);
    maxDist = Math.max(mag, maxDist);

    // project third corner
    Cartesian2.Cartesian3.add(center, u, corner);
    Cartesian2.Cartesian3.subtract(corner, v, corner);
    Cartesian2.Cartesian3.add(corner, w, corner);

    Cartesian2.Cartesian3.subtract(corner, position, toCenter);
    mag = Cartesian2.Cartesian3.dot(direction, toCenter);

    minDist = Math.min(mag, minDist);
    maxDist = Math.max(mag, maxDist);

    // project fourth corner
    Cartesian2.Cartesian3.add(center, u, corner);
    Cartesian2.Cartesian3.subtract(corner, v, corner);
    Cartesian2.Cartesian3.subtract(corner, w, corner);

    Cartesian2.Cartesian3.subtract(corner, position, toCenter);
    mag = Cartesian2.Cartesian3.dot(direction, toCenter);

    minDist = Math.min(mag, minDist);
    maxDist = Math.max(mag, maxDist);

    // project fifth corner
    Cartesian2.Cartesian3.subtract(center, u, corner);
    Cartesian2.Cartesian3.add(corner, v, corner);
    Cartesian2.Cartesian3.add(corner, w, corner);

    Cartesian2.Cartesian3.subtract(corner, position, toCenter);
    mag = Cartesian2.Cartesian3.dot(direction, toCenter);

    minDist = Math.min(mag, minDist);
    maxDist = Math.max(mag, maxDist);

    // project sixth corner
    Cartesian2.Cartesian3.subtract(center, u, corner);
    Cartesian2.Cartesian3.add(corner, v, corner);
    Cartesian2.Cartesian3.subtract(corner, w, corner);

    Cartesian2.Cartesian3.subtract(corner, position, toCenter);
    mag = Cartesian2.Cartesian3.dot(direction, toCenter);

    minDist = Math.min(mag, minDist);
    maxDist = Math.max(mag, maxDist);

    // project seventh corner
    Cartesian2.Cartesian3.subtract(center, u, corner);
    Cartesian2.Cartesian3.subtract(corner, v, corner);
    Cartesian2.Cartesian3.add(corner, w, corner);

    Cartesian2.Cartesian3.subtract(corner, position, toCenter);
    mag = Cartesian2.Cartesian3.dot(direction, toCenter);

    minDist = Math.min(mag, minDist);
    maxDist = Math.max(mag, maxDist);

    // project eighth corner
    Cartesian2.Cartesian3.subtract(center, u, corner);
    Cartesian2.Cartesian3.subtract(corner, v, corner);
    Cartesian2.Cartesian3.subtract(corner, w, corner);

    Cartesian2.Cartesian3.subtract(corner, position, toCenter);
    mag = Cartesian2.Cartesian3.dot(direction, toCenter);

    minDist = Math.min(mag, minDist);
    maxDist = Math.max(mag, maxDist);

    result.start = minDist;
    result.stop = maxDist;
    return result;
  };

  var scratchBoundingSphere = new Transforms.BoundingSphere();

  /**
   * Determines whether or not a bounding box is hidden from view by the occluder.
   *
   * @param {OrientedBoundingBox} box The bounding box surrounding the occludee object.
   * @param {Occluder} occluder The occluder.
   * @returns {Boolean} <code>true</code> if the box is not visible; otherwise <code>false</code>.
   */
  OrientedBoundingBox.isOccluded = function (box, occluder) {
    //>>includeStart('debug', pragmas.debug);
    if (!when.defined(box)) {
      throw new Check.DeveloperError("box is required.");
    }
    if (!when.defined(occluder)) {
      throw new Check.DeveloperError("occluder is required.");
    }
    //>>includeEnd('debug');

    var sphere = Transforms.BoundingSphere.fromOrientedBoundingBox(
      box,
      scratchBoundingSphere
    );

    return !occluder.isBoundingSphereVisible(sphere);
  };

  /**
   * Determines which side of a plane the oriented bounding box is located.
   *
   * @param {Plane} plane The plane to test against.
   * @returns {Intersect} {@link Intersect.INSIDE} if the entire box is on the side of the plane
   *                      the normal is pointing, {@link Intersect.OUTSIDE} if the entire box is
   *                      on the opposite side, and {@link Intersect.INTERSECTING} if the box
   *                      intersects the plane.
   */
  OrientedBoundingBox.prototype.intersectPlane = function (plane) {
    return OrientedBoundingBox.intersectPlane(this, plane);
  };

  /**
   * Computes the estimated distance squared from the closest point on a bounding box to a point.
   *
   * @param {Cartesian3} cartesian The point
   * @returns {Number} The estimated distance squared from the bounding sphere to the point.
   *
   * @example
   * // Sort bounding boxes from back to front
   * boxes.sort(function(a, b) {
   *     return b.distanceSquaredTo(camera.positionWC) - a.distanceSquaredTo(camera.positionWC);
   * });
   */
  OrientedBoundingBox.prototype.distanceSquaredTo = function (cartesian) {
    return OrientedBoundingBox.distanceSquaredTo(this, cartesian);
  };

  /**
   * The distances calculated by the vector from the center of the bounding box to position projected onto direction.
   * <br>
   * If you imagine the infinite number of planes with normal direction, this computes the smallest distance to the
   * closest and farthest planes from position that intersect the bounding box.
   *
   * @param {Cartesian3} position The position to calculate the distance from.
   * @param {Cartesian3} direction The direction from position.
   * @param {Interval} [result] A Interval to store the nearest and farthest distances.
   * @returns {Interval} The nearest and farthest distances on the bounding box from position in direction.
   */
  OrientedBoundingBox.prototype.computePlaneDistances = function (
    position,
    direction,
    result
  ) {
    return OrientedBoundingBox.computePlaneDistances(
      this,
      position,
      direction,
      result
    );
  };

  /**
   * Determines whether or not a bounding box is hidden from view by the occluder.
   *
   * @param {Occluder} occluder The occluder.
   * @returns {Boolean} <code>true</code> if the sphere is not visible; otherwise <code>false</code>.
   */
  OrientedBoundingBox.prototype.isOccluded = function (occluder) {
    return OrientedBoundingBox.isOccluded(this, occluder);
  };

  /**
   * Compares the provided OrientedBoundingBox componentwise and returns
   * <code>true</code> if they are equal, <code>false</code> otherwise.
   *
   * @param {OrientedBoundingBox} left The first OrientedBoundingBox.
   * @param {OrientedBoundingBox} right The second OrientedBoundingBox.
   * @returns {Boolean} <code>true</code> if left and right are equal, <code>false</code> otherwise.
   */
  OrientedBoundingBox.equals = function (left, right) {
    return (
      left === right ||
      (when.defined(left) &&
        when.defined(right) &&
        Cartesian2.Cartesian3.equals(left.center, right.center) &&
        Transforms.Matrix3.equals(left.halfAxes, right.halfAxes))
    );
  };

  /**
   * Duplicates this OrientedBoundingBox instance.
   *
   * @param {OrientedBoundingBox} [result] The object onto which to store the result.
   * @returns {OrientedBoundingBox} The modified result parameter or a new OrientedBoundingBox instance if one was not provided.
   */
  OrientedBoundingBox.prototype.clone = function (result) {
    return OrientedBoundingBox.clone(this, result);
  };

  /**
   * Compares this OrientedBoundingBox against the provided OrientedBoundingBox componentwise and returns
   * <code>true</code> if they are equal, <code>false</code> otherwise.
   *
   * @param {OrientedBoundingBox} [right] The right hand side OrientedBoundingBox.
   * @returns {Boolean} <code>true</code> if they are equal, <code>false</code> otherwise.
   */
  OrientedBoundingBox.prototype.equals = function (right) {
    return OrientedBoundingBox.equals(this, right);
  };

  exports.OrientedBoundingBox = OrientedBoundingBox;

});
//# sourceMappingURL=OrientedBoundingBox-8897f474.js.map